Thermo Scientific Surveyor Plus HPLC System | Control Computer

Description

Thermo Surveyor HPLC
Item Details
Thermo Surveyor HPLC system with
PDA+ detector, MS Pump+, Autosampler+, and
control computer.
All units work and are in good cosmetic condition.
The Finnigan Surveyor Plus family of HPLC instruments is specifically optimized for the most demanding HPLC and LC/MS applications. Short cycle times, high sample capacity, low flow rate performance, and patented LightPipeTM technology have been integrated into one complete system for high-throughput sample processing environments.
Surveyor PDA Plus
The detector is a full-featured, time-programmable, photodiode array (PDA) detector capable of scanning the ultraviolet-visible wavelength range from 190 to 800 nm. You can acquire data across the entire spectral range (with an effective resolution of 1.2 nm) at a rate of 0.5 to 20 Hz with 20-bit digital conversion. The dual-light source includes a deuterium lamp for detection in the ultraviolet wavelength range (190 to 360 nm) and a tungsten-halogen lamp for detection in the visible wavelength range (360 to 800 nm). The optical bench contains a beam combiner, focusing lens, filter wheel, flowcell, beam shaper, folding mirror, and grating.
Wavelength Range: 190 nm to 800 nm continuous
Wavelength Accuracy: ±1 nm at 254 nm and 656 nm
Digital Wavelength Resolution: 1.2 nm
Absorbance Range: 2.0 AU to +4.0 AU, 20-bit resolution
Short Term Noise: ? 6 ?AU/cm at 254 nm for the 50-mm LightPipe
Drift: ? 1 mAU/h after warm up at 254 nm at a stable temperature (±1 °C)
Warm-up: 90 min to meet noise and drift specifications
Linearity: deviation ? 5% up to 2.0 AU at 256 nm
Scan Rate: 0.5, 1, 2, 4, 5, 10, or 20 Hz (user selectable)
Rise Time: 0.0, 0.1, 0.2,0.5, 1, 2, 5, or 10 s (user selectable)
Cell Dimensions: 10-mm LightPipe flowcell, 50-mm LightPipe flowcell
Cell Pressure Rating: 1000 psi
Diodes & Spacing: 512 / 1.2 nm
Light Source: Deuterium and tungsten-halogen lamps, pre-aligned
Analog Outputs (2): 20-bit digital / analog conversion, unattenuated at 10 mV/AU, 100 mV/AU, or 1.0 V/AU
Remote Controls: Start, Zero
Operating Temp: 10?40 °C
Operating Humidity: 5 to 95% relative, non-condensing
Sur
veyor MS Pump Plus
The Surveyor MS Pump Plus is a quaternary, low-pressure mixing pump with built-in solvent degassing and pulse dampening systems. The pumping system provides optimum performance in the lower flow rate ranges needed for mass spectrometry. You can run precise gradients from 25 to 2000 ?L/min. An extremely low gradient delay volume of 80 ?L ensures minimum system cycle times. The integral vacuum degasser offers superb solvent degassing efficiency with less than 500 ?L of volume, and the pulse dampener produces stable flow rates with only 3 ?L of delay volume. The Surveyor MS Pump Plus has three major components: the vacuum degasser assembly, the liquid displacement assembly (LDA), and the pulse dampening assembly.
Minimum Flow Rate: 0.2 ?L/min isocratic, 25 ?L/min gradient
Maximum Flow Rate: 2000 ?L/min
Flow Rate Resolution: 0.1 ?L/min
Pressure Range: 0 to 400 bar (0 to 5800 psi)
Operating Range: 40 to 400 bar (588 to 5800 psi)
Pressure Resolution: 0.01 bar (0.15 psi)
Solvent Capacity: Quaternary
Composition Accuracy: ± 1% at a flow rate of 200 ?L/min
Piston Volume: 24 ?L
Delay Volume: 80 ?L
Degasser Type: Vacuum membrane
Degasser Capacity: 4 channels
Degasser Volume: < 500 ?L per channel
Pulse Dampener: 3 ?L, dynamic
Remote Controls: Start, RS232 serial interface for Xcalibur software
Operating Temp: 10?40 °C
Operating Humidity: 5 to 95% relative, non-condensing
Surveyor Autosampler Plus
The Thermo Scientific Surveyor? Autosampler Plus platform supports high-throughput analysis while maximizing sampling capacity and minimizing bench space. The Surveyor Autosampler Plus is extremely versatile with multiple injection modes, an integrated column oven, and sample tray temperature control.
Vial Capacity: 200 vials with tray temperature control
Injection Precision: 1.0% RSD at 5 µL and higher
Minimum Sample Volume: 1 µL can be injected from a 5 µL sample
Injection Volume: 20 µL loop standard, up to 1000 µL injections with larger loops and syringe
Sample Carryover: ? 0.1%, 6 mL flush can be used for internal and external needle wash
Needle Height: Programmable in 0.1 mm increments. Active vial bottom search selectable on/off.
Column Oven: 5?95 °C ± 0.5 °C selectable in 1 °C increments
Tray Temperature Control: 0?60 °C ± 0.5 °C selectable in 1 °C increments
Remote Controls: Ethernet interface for PC-based software control
Sample Preparation: Capacity for four 15 mL reagent vials for flushing, washing, sample dilution, and/or reagents for sample derivatization
Operating Temp: 10?40 °C
Operating Humidity: 5 to 95% relative, non-condensing
Items included in this auction:
Surveyor PDA Plus
Surveyor MS Pump Plus
Surveyor Autosampler Plus
All cabling and wires to connect system (including Thermo Interconnect cable)
Tubing as shown
Windows 7 64-Bit PC loaded with a copy of Xcalibur 3.1 Control Software
Peripherals (Monitor, keyboard, & mouse)
Terms Of Sale
Only items in the description are included in the sale. If there is a question about what is or is not included please ask prior to purchasing
Buyer must have equipment commissioned by a qualified professional proficient with the system
If a computer is included in the sale, media licensing and terms of use are the responsibility of the buyer. No licenses are included or implied unless specifically stated in the description
Equipment is cleaned with 70% IPA wipe only. Chemicals and other contaminants may be present and proper handling and commissioning of equipment is the responsibility of the buyer.
All major forms of payment accepted including Paypal, credit card, wire /  electronic bank transfer, bank checks, business checks (must clear prior to shipment)
See auction listing terms for warranty / return period
All returns must be received in the same condition they were sold
All returns must be packaged to avoid shipping damage. Return shipping damage is the responsibility of the buyer.
Shipping Information
The best shipping / freight company will be selected at the seller's discretion based off the parcel to be shipped and delivery location
If buyer would like to arrange their own shipping please let us know prior to checkout and a zero sum shipping invoice will be provided; we will also be happy to ship with your UPS or FedEx account
Items that ship freight will be packed into a palletized fully enclosed wooden crate
All freight shipments require contact name, business name, phone number, email, physical street address
Freight quotes and flat fees are delivered to a business with a loading dock; if lift gate service is required at delivery it will be an additional
For international shipments, it is the buyer's responsibility to determine import restrictions and pay all duties/taxes
Flat rate shipping amounts are for 48 continental US states
Local pickups available with appointment from Tewksbury, MA