Strong Epoxy Repair Kit for All Materials 10ML with 2 Mixing tips 10 UNIT PACK

Description

Technical Product Bulletin
HIGH STRENGTH COMPOUND EPOXY ADHESIVE
PRODUCT DESCRIPTION:
AA-BOND 28 is a two part, heat-resistant and low exothermic, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with
superior chemical resistance
and shear strength.
AA-BOND 28 contains a thixotropic agent which impedes thinning out of the
material during heat cure when properly mixed and cured.  This is an odorless formulation used across all industries.
Takes 24 hours to Cure / full hold and harden.  Do not move after 1 hours until it fully cures.
You have 1 hour work time which is the amount of time you have to apply the product before it begins to dry.
Industrial grade bond to all substrates.  The only two substrates which exhibit a weak bond are rubber and plastics.
Comes with two mixing tips.  Simply remove cap, twist and dispense product through the mixing tip.
The mixing tip will not be usable if you stop dispensing for an hour.  Keep tip attached until next use at which time you can replace it.
This 10ML cartridge also comes with a plunger so a dispensing gun is not needed.
GENERAL PROPERTIES:
Appearance
Amber
Cure Type
Room temperature or Heat Cure
Benefits
Room temperature or Heat Cure
Tough enamel like cure
Bonds to a variety of substrates
Weather resistant
Mix Ratio by weight
100:100 / Resin:Hardener
Substrates
Metals, glass, ceramics, wood and many plastics
Operating Temperature
-60 to 163 °C
Typical Application(s)
Staking components, bonding, laminating and repair applications
UNCURED PROPERTIES:
Specific Gravity, mixed
1.07
Reactive solids contents, %
100
Pot Life
60 minutes
CURE SCHEDULE:
4 to 6 hours
@ 65°C
24 hours
@ 25°C
MISC PROPERTIES:
Shelf Life
2 years closed packaging
Glass Transition Temp, Tg
93°C
Hardness, Shore D
78
Lap shear
2900 psi (Alum to Alum)
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1)
Carefully clean and dry all surfaces to be bonded.
2)
Apply AA-BOND 28 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact
pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
3)
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents
of the shipping container be thoroughly mixed prior to use.
4)
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming
cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as
well as liquid components and should be re-dissolved prior to use for best results.
AVAILABILITY:
This epoxy can be supplied in various different packages.
Data Sheets:
TDS
|
MSDS
available upon request.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application