SRC Dash Bare Panel CRF 250L Rally & 300L Rally

Description

SRC Bare
Dash
Panel 2017-2020 CRF 250L Rally and 2021 CRF 300L Rally ONLY!
Add some room for switches and electrical accessories in an ergonomically safe and accessible location around the perimeter of the stock instrument panel.  Constructed of 16 gauge steel powder coated a nice satin black.
To install, you'll need to remove the instrument panel. This is fairly easy. It takes about half an hour with common hand tools.  We recommend watching our as it clearly shows how to remove the windscreen,  the headlight assembly and then you have easy access the 3 screws that hold the instrument panel in place as well as the wiring harness connector. With the panel removed, position the Rally Dash into place end then simply re-install the panel, headlight and windscreen and you are ready to wire up some switches and install your favorite electrical accessories!
The upper outlet port diameter is 1-1/8"
The lower switch ports are 1/2" diameter openings.
Note: The installed photo shows the product with the switches/chargers, these are not included with this Bare Dash Panel product.
Also available: Panel with water-resistant switches, 12-volt socket and Dual USB Charger for - See product on our site
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.