-40%
RO Booster Pump Assembly Reverse Osmosis Water System Up Pressure Solenod Valve

RO Booster Pump Assembly Reverse Osmosis Water System Up Pressure Solenod Valve

$ 53.85

Availability: 60 in stock
  • MPN: N/A
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Brand: Unbranded
  • Type: WATER PRESSURE BOOSTER PUMP
  • Return shipping will be paid by: Seller
  • Custom Bundle: Yes
  • Material: Metal
  • Compatible Model: UNIVERSAL
  • Compatible Brand: UNIVERSAL
  • Condition: New
  • Model: 752
  • Number in Pack: 1
  • Filtration Method: Reverse Osmosis
  • Bundle Description: ACCESSORIES CAN BE PURCHASED BY REQUEST
  • Color: Multicolor
  • Suitable For: Household
  • Restocking Fee: 20%

    Description

    Booster Pump Assembly (for up to 100GPD membrane RO systems, good for 50GPD, 75GPD too).  Comparable to Aquatec 8800 and 6800 pump
    part # 752
    NOW with BONUS pressure gauge  (so you can tell the boost pressure after the pump)
    This water booster pump is to boost the input water pressure.  It is usually used to increase the input water pressure for Reverse Osmosis systems. (boost pressure to 60 to 80 psi)
    The Pump assembly includes:  pump, transformer, solenoid valve, pressure switch.  The pump turns-on to produce water into the pressure tank, and then turns off when the pressure tank is full or when storage tank pressure reaches 40 psi.
    Benefits of using Booster pump for Reverse osmosis systems
    ·
    For RO systems, a increased in input pressure means a increase in
    water production
    and
    water purity
    ·
    RO systems will run more efficient, and have less drain water. Since it uses pressure switch and solenoid valve to turn on/off the water input, it can turn-on and turn-off more accurately than the mechanical auto-shut-off valve.
    ·
    If you use large water container or open water tank, you can use float switch or level switch to control the operation of the pump as well.
    ·
    The transformer included in the package is
    plugged into regular 110V/60HZ electrical outlet
    Specifications:
    Booster Pump:
    Boost pressure
    If input water pressure is about 30 to 40 psi, the pump will boost pressure to about 70 to 80 psi for RO systems
    Water open flow
    1 liter per minute or 0.26 gallons per minute
    Electrical:
    24VDC,  0.22Amp
    Connection
    Inlet and outlet,  3/8" FPT,  or two 3/8"MPT to 1/4 compression fitting are included (connects to 1/4" tubing)
    Motor
    Permanent Magnet,  24VDC, enclosed
    PUMP
    Diaphragm pump, 3 chamber, self-priming.  It is able to run dry
    Material:  Housing
    Nylon
    Valves
    EPDM
    Diaphragm
    Santoprene
    Fasteners
    Stainless Steel
    Dimension
    diameter = 3.5" , length = 7.5"
    Solenoid valve
    Type
    Normally Close (NC)   orifice opens when electrically energized
    Electrical:
    24VDC, Leads = 20 AWG
    Water pressure
    0 to 120 psi
    Connection:
    two ¼”x ¼” fitting included:  connect to ¼” tubing
    Mounting
    It has two screw holes for mounting
    Material:  valve
    Plastic valve body, water contacts only plastic and nylon parts
    Solenoid
    brass outside body, stainless steel internal parts
    Pressure switch
    Type:
    Normally closed (NC)  will cut off circuit when water pressure reaches 40 psi
    Pressure
    Cut off pressure at 40 psi,  maximum inlet pressure 120 psi
    Connection
    ¼” compression ,  connect to ¼” tubing
    Material
    Polypropylene
    Electrical: leads
    20 AWG, 14” long
    Max:
    15A, 250Volts
    Transformer
    Input
    110V/60Hz
    Output
    24VDC  1A
    Leads
    18 AWG, 5 feet