Reverse Osmosis / RO.DI Complete kit Booster Pump 100 GPD Shutoff & Low Switches

Description

Detailed Description:
Full kit Reverse Osmosis Booster Pump 100 GPD including the following.
(110 volt)
DC 24 V Transformer + 2 Pc's Connect Fittings  (1/4 tube x 3/8 Threaded ) + High Pressure Shut Off Switch + Low Pressure Switch + Holding Bracket + 2 feet 1/4 inch tube
Note:
Using Booster pump is
recommended
for those who they have low incoming city water pressure less than 50 PSI or well water tank pressure 40 - 60 PSI. Buy this product only when your waste is not shutting off and/or the tank is not filling up after 2 hours. (do not buy this pump if you are on city water pressure is 55 PSI and up).  Contact us first if you are not sure what you are buying. This pump will not increase the production volume or  the pressure for those who they are on city water pressure 55 PSI and up.  This pump will not help for those who would like to increase the water transfer volume to the ice maker or the fridge, that product named a demand pump or delivery pump which is completely different product.  Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well if your city water pressure is lower than 50 PSI.  Boost pressure 80 PSI
You can attach the Bracket on the side of your RO system as shown in the second picture.
You can change the parts places on the same bracket as the way you like according to some customized setup you prefer.
We supply you the kit as shown in the first picture. Transformer and high pressure on the side, booster pump and low pressure switche all connect together for easy installation.
You only need to supply the booster pump kit from your system third stage outlet and divert the third stage outline ( previously connected to you system third stage outlet) to your booster outlet. And connect the high pressure switch to your tank tube line (any place) before or after the auto shut off valve is exist.  You can ask any question you may have during your installation and we will be happy to assist you.
Using Booster pump is recommended for those who they have low incoming city water pressure 50 PSI or less.
Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well.  Boost pressure 80 PSI
Features:
This 100 GPD booster pump is designed for membranes rated up to 125 GPD.
working pressure: +/- 80 PSI  ( 60 to 110 PSI) all depend on the incoming water pressure  and membrane condition)
This pump are able to work at least 3 months continuously without stop.
Safe power operation with, low energy (low voltage - 24 volt). Transformer included.
The motor of these boosters is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiencies never mind if its installed in warm, humid, hostile environment where other pumps can’t operate in such hard environments.
High pressure
reverse osmosis booster pump ( on - off) operation control,it will turn off the booster pump when the tank is full.
Low Pressure Switch
Job is to shut off the Booster Pump when your water filters are clogged with Sediment / Dirt Etc.. or there is no enough feeding water to pass through the pump and avoid any burring possibilities to your booster pump motor.
Package includes:
additional 2 Ft tube 1/4 inch,  pump, transformer, High pressure switch, Low Pressure Switch and, Holding Bracket.  The pump will automatically control all residential reverse osmosis systems.  The pump turns on to produce water into the pressure tank, and then turns off when the pressure tank is full.
Transformer Specifications:
Input 110 AC
Output Volts :24 Volt DC