Rear Windshield Air Dry Silver Electrically conductive Epoxy Repair Kit 2.5gm

Description

Back-Glass Defroster
Windshield Repair Kit Air Dry Silver conductive  Epoxy 10gm,1:1 Mix Ratio
This Atom Adhesives'  Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes: two-part Conductive Tab Repair
Epoxy if an existing bed of solder is not on the glass, to bond the tabs onto the glass forming an electrical and structural connection; Grid Repair for scratched or broken defroster
lines; This handy kit pays for itself.
CURE SCHEDULE:
24 hour @ Room Temperature
TYPICAL APPLICATIONS:
Busted Auto Parts-Glass
New (1) Defroster Repair Kit
Reattach separated defroster tabs
Repair small cuts in line grid
2 Part Silver Conductive Epoxy
Reattaches defroster tabs to window
Quick easy repairs.
Note: There are many YouTube video that will visually guide you through this process.
WINDOW PREPARATION:
Begin the repair process by using your soft cloth and window cleaner to thoroughly remove all dirt, dust, dog drool, ice cream smears and greasy hand prints from the rear
window. Clean it inside and out because you need to be able to see through the glass to discern the breaches in the grid. More important, you need to give the conductive
adhesive a clean surface to stick to.
How To Repair Window Defogger Strip:
HOW TO REPAIR THE DEFROSTER TAB:
1.
Clean the tab and the contact area with the alcohol prep. Then apply activator to both surfaces and let it dry.
2.
Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds;
howeve
r, maintain
contact
for 24 Hours
with a tape for example until the adhesive is
completely cured
to get the best result.
3.  P
ress the tab onto the contact area. Hold it in place until the adhesive sets up, usually about two minutes. Wait 24 hours to use the defogger.
DEFROSTER TABS:
The tabs located along the sides of the defroster connect the defroster electrically to the vehicles defrost circuit. One tab is the positive and the other ground. If a tab comes
off the defroster this will mean total instantaneous failure of the defroster.
1.
Our kit is an epoxy adhesive. To use, carefully clean and dry all surfaces to be bonded from all dirt, dust, debris and handprints from the rear window.
2.
Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds;
however, maintain contact
until adhesive is completely cured.
3.
Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly
mixed prior to use.
4.
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to
mixing components may be
necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
FEATURES:
Anyone can fix a detached rear window defogger tab
Easy-to-use kit simplifies repair
Inexpensive - saves the cost of having a shop perform the repair
Glue is specially formulated to conduct electricity
Instructions included
Made in the USA
BENEFITS:
Easy 1 to 1 mix ratio for multiple applications.
Simply place the luer lock caps back on the syringes and re-use.
1 year shelf life.
Made on demand and ships within 24 hours.
See instruction for contained easy mixing easy mixing.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application