-40%
PES101 POWER METAL PASTE- Comparable to Belzona 1111 and 3M Metal Repair EG 503
$ 79.2
- Description
- Size Guide
Description
www.pes-solutions.comPES 101 Power Metal Repair Paste - 1 KG kit
101 Power Metal Repair Paste
is a two component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable. The product is suitable for emergency repairs or part of planned maintenance to equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearing housings, damaged flanges, leaking tank seams and cracked engine blocks.
Main characteristics - Mechanical Properties ?
Two component
Adhesion
Solvent free epoxy Tensile Shear to ASTM D1002 2630psi (185kg/cm²)
3:1 mixing ratio by volume
Compressive strength
Usable life 25 minutes 68°F (20
°
C) Tested to ASTM D 695 15,300psi (1075kg/ cm²)
Touch dry 1 hour 68°F (20
°
C)
Corrosion Resistance
Machinable 2 hours 68°F (20
°
C) Tested to ASTM B117 Minimum 5000 hours
100 Rockwell R Hardness (Once fully cured)
Flexural Strength
Applied by spatula or applicator tool Tested to ASTM D790 10,000psi (703kg/cm²)
Available in 1kg, 2kg, 3kg, 30kg pack sizes
Heat Resistance
Suitable for water immersion up to 158°F (70°C) and intermittent contact with steam up to 248°F (120°). Dry heat resistance up to 392°F (200°C)
Legal Notice:
The data contained within this Product Specification is furnished for information only and is believed to be reliable at the time of issue. We cannot assume responsibility for results obtained by others over whose methods we have no control. It is the responsibility of the customer to determine the products suitability for use. PES accepts no liability arising out of the use of this information or the product described herein.
