PES 203 CERAMIC FLUID BLUE 1KG = BELZONA 1341 & 3M CERAMIC SURFACER CR 511

Description

PES 203 Super Flow Ceramic Fluid - BLUE - 1KG kit
PES 203 Super Flow Ceramic Fluid
is a two component solvent free epoxy metal repair fluid designed for use on a wide range of metallic surfaces subject to cavitation, low particulate abrasion and impact.  The product is suitable for emergency repairs or part of planned maintenance to equipment such as worn impellers, damaged valves, damaged pump casings, eroded pipe work, A-frames and rudders.  Once cured, the material has a high gloss finish ensuring flow efficiency gains for the equipment and components coated in the material.
Main characteristics -                                                    Mechanical Properties ?
Two component
Adhesion
Solvent free epoxy                                                                         Tensile Shear to ASTM D1002            2650psi              (187kg/cm²) Usable life 20 minutes @68°F (20
°
C)
Compressive strength
Touch dry 90 minutes @ 68°F (20
°
C)                                         Tested to ASTM D 695                  10,450psi              (735kg/ cm²)
Full cure 6 days @ 68°F (20
°
C)
Corrosion Resistance
100 Rockwell R Hardness (Once fully cured)                             Tested to ASTM B117                     Minimum 5000 hours
Applied by brush or applicator tool
Flexural Strength
Available in 1kg, 3kg, 30kg pack sizes                                         Tested to ASTM D790                      8100psi             (570kg/cm²)
Heat Resistance
Suitable for water immersion up to 158°F( 70°C) and intermittent contact with steam up to 248°F(120°C).  Dry heat resistance up to 302°F(150°C