iSpring 4 Gallon Pressurized Water Storage Tank RO Systems with Ball Valve NSF

Description

At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.
T32M (3.2 gal)
T55M (5.5 gal)
T11M (11 gal)
T20M (20 gal)
T40M (40 gal)
How does it work?
iSpring pre-pressurized tanks are perfect for use in under-sink water storage with your reverse osmosis system. The RO process is on the slower side, so a pressurized storage tank is typically required to supply water from the system on demand. Your RO system will fill the tank to capacity, and when you open your RO water dispenser, the water is sent out by the tank's pressurized air bladder.
All tanks have a maximum working pressure of 100 psi.
iSpring Pre-pressurized tanks are tested by independent third party against NSF/ANSI standard (61 for Drinking Water System Components) for material safety and structural integrity requirements, 2018
iSpring tanks have a special surface treatment on the metal body that prevents rust and dent.
All of our metal tanks pass pressure tests before we ship them out to customers.
Unlike traditional plastic, stainless steel that does not break or strip easily is used in our tank valve thread and pressure check valve.
Inside all iSpring tanks, a durable butyl diaphragm with post-cure procedures provides a tasteless and odorless water chamber.
T32M
T55M
T11M
T20M
T40M
Pressurized Tank
✓
✓
✓
✓
✓
Capacity
Up to 3.2 Gal
Up to 5.5 Gal
Up to 11 Gal
Up to 20 Gal
Up to 40 Gal
Size
11x11x14 in
12x12x16 in
15x15x22 in
16x16x30 in
17x17x41 in
Tank Valve Position
Top
Top
Bottom
Bottom
Bottom