INNOTEC Repaplast 2 part Epoxy, Quick Set, Sandable, Black, 50ml Cartridge

Description

Repaplast Epoxy
DO YOU EVER NEED TO REPAIR PLASTIC FOR SANDING AND SPRAYING QUICKLY?
Repaplast will repair and glue most surfaces such as most plastic, metal and wood. Often used in Bodyshops and by other professionals. All our customers swear by it!
Now for the technical bit:
Repaplast is a dual component product especially designed for the quick repair and gluing of metals and almost every type of modern synthetic. Repaplast adheres perfectly to all kinds of plastics and lacquered or bare metal parts. The product dries very quickly, as a result of which it can be further processed after just 10 minutes.
Often gluing with plastic glue alone ,does not provide sufficient strength. With Repaplast, not only is the bond a strong one, but the break can also be reinforced. Because the product has a certain flexibility, the repaired part can be put under repeated load again. Repaplast is
very easy to sand
and can be sprayed over using just about any type of modern lacquer system.
As a part of the
Repaplast Plastic Repair System
, Repaplast can also be applied for the long-term repair of cracks and holes in plastic.
Its packaging in a handy dual tube and the use of the
Mixer Gun
makes Repaplast easy to use and to dose with accuracy. The special mixer nozzle ensures the right mixture proportions and prevents the remainder from hardening in the container. This means that an opened container of Repaplast can still be kept for a long time.
Surface preparation:
The surface must be clean, dry and free of grease. Clean surfaces with Innotec
Repaplast Cleaner
Antistatic and pre-treat with Innotec
Repaplast Primer
New Formula.
Method of use:
Because Repaplast dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Repaplast. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product.
When gluing:
Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec
Repaplast Cleaner
Antistatic. In the case of plastics or difficult surfaces, we recommend pre-treatment with Innotec
Repaplast Primer
New Formula. Use the mixer
nozzle
to spread the Repaplast on the surface and join the parts to be glued together as quickly as possible, within 30 seconds. Keep the repair area fixed for a short time until the Repaplast has strengthened sufficiently.
When repairing:
Clean the repair area with Innotec
Repaplast Cleaner Antistatic.
Grind the edges of the crack in a V-shape. Roughen the rear with a grinding disk and sand down the front with P120 sandpaper. Clean with Innotec
Repaplast Cleaner
Antistatic. Apply a thin layer of Innotec
Repaplast Primer
New Formula to the front and back. To reinforce larger repairs, apply a single layer of Innotec Repaplast Foundation Tape to the back. Apply the required amount of Repaplast to the front using the mixer nozzle and smooth off with a spatula or filling knife. For large repairs, apply a thin, broadly overlapping layer to the back and smooth off with a nylon brush.
Properties:
-Dual component product for repairing and gluing plastic.
-Excellent adhesion.
-Very fast drying.
-Perfectly sandable and sprayable.
-Handy dual tube ensures accurate dosing.
Whats included:
One 50ml cartridge
One mixing nozzle (contact me to purchase additional nozzles)
Dispensing/Mixer gun is required and is not included (Dispensing gun type: MixPac DMA50)