Flexible Epoxy for Automotive, Medical, Plastic Repair 2170, 2.5gm Pouch

Description

Technical Product Bulletin
FLEXIBLE PLASTIC BONDER
PRODUCT DESCRIPTION:
AA-BOND 2170
is a flexible thixotropic bonding adhesive designed for bonding all types of plastics including nylon, PVC, polyethylene, acrylic, lexan, kapton or almost
any thermoplastic
substrate.
AA-BOND 2170
is low viscosity and easy to apply, can cure at room temperature.
AA-BOND 2170
is high technology epoxy was formulated for applications in the automotive, medial, aerospace, photonic and assembly industries and can be used
anywhere that require
excellent
chemical fastening to plastic parts.
GENERAL PROPERTIES:
Appearance
Amber
Cure Type
Room temperature or Heat cure
Benefits
Low viscosity
Easy to apply
Mix Ratio by weight
100:100 / Resin:Hardener
Operating Temperature
-60 to 115 °C
Typical Applications
Automotive, Medical, Aerospace, Photonic, Assembly, industries, Also can be used anywhere that requires excellent chemical fastening to plastic parts.
UNCURED PROPERTIES:
Viscosity @ 25 °C
3,400
Specific Gravity, mixed
1.19
Reactive solids contents, %
100
Pot Life
60 minutes
CURE SCHEDULE:
1 hour
@ 65°C
24 hours
@ 25°C
CURED PROPERTIES:
Glass transition temperature (Tg), °C
10
Hardness, Shore D
65
Lap shear strength, psi
2400 (Alum to Alum)
GENERAL INFORMATION:
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).
HOW TO USE:
1
1.
Carefully clean and dry all surfaces to be bonded
2
. Apply
AA-BOND 2170
completely mixed adhesive to the prepared surfaces, and gently press these surfaces
together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive
is completely cured.
3.
Some separation of components is common during shipping and storage. For this reason, it is recommended
that the contents of the shipping container be thoroughly mixed prior to use.
4.
Some ingredients in this formulation provided may crystallize when subjected to low temperature storage.
A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized
epoxy components do not react as well as liquid components and should be re-dissolved prior to use
for best results.
AVAILABILITY:
This epoxy can be supplied in many different packages.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application