EOD Adhesive Kit - Devcon 1-Minute Epoxy 5-PackDispensing Kit - (14277)

Description

EOD Adhesive Kit - Devcon 1-Minute Epoxy 5-PackDispensing Kit - (14277)
This is a 5-pack cartridge & dispensing kit for the Devcon 1-Minute Epoxy (14277). It includes 5 of the 50ml 2-Part cartridges of 14277, 10 mixing nozzles, and 1 MixPac dispenser. This kit was specially configured for Police & Fire Departments, Emergency and First-Responder teams to aid in EOD and IED disarmament processes. EOD means Explosive Ordinance Disposal, whereas IED means Improvised Explosive Device. Devcon 1-Minute Epoxy is a very popular extremely fast setting epoxy adhesive used in industrial, professional, and Do-It-Yourself applications. It is an adhesive with 30 second to 1 minute Rapid-curing, general-purpose adhesive/encapsulate which easily dispenses and mixes in seconds, dries in 1 minute, reaches functional strength in 30 minutes, and a full cure in 2 hours, more than 90% faster than most all other rapid-setting adhesives available. KEY FEATURES: Bonds rigid durable substrates such as metals, glass, ceramics, concrete, fiberglass, and wood in all combinations 30 seconds to 1 minute Extremely fast set/working time Forms a clear hard rigid bond self leveling liquid in minutes Functional strength in 30 minutes Fully cured in 2 hours, more than 90% faster than most other fast-set adhesives 100% reactive, no solvents Medium viscosity (70,000 cps) Intended Uses: Bonds metals, fabrics, ceramics, glass, wood, fiberglass and concrete (and in combinations) Popular for filling voids and potting/filler compounds Physical Properties: Cured for 7 days @ 75° F Adhesive Tensile Lap Shear [GBS] 1,600psi @ 0.005" bondline Dielectric Strength 490 volts/mils Gap Fill Good Impact Resistance 4.5 ft.lb./in.(2) Service Temperature Dry, -40°F to 200°F Shore Hardness 82 Shore D Solids by Volume 100 Specific Volume 25.72 in.[3)/lb. Tensile Elongation 1% Tpeel 2-3pli TESTS CONDUCTED: Adhesive Tensile Shear ASTM D 1002 Dielectric Strength, 490 volts/mil ASTM D 149 Cured Hardness Shore D ASTM D 2240 Cured Density ASTM D 792 Uncured: Color Opaque Amber Fixture Time 1 minute @ 72°F Full Cure 2hr. @ 72°F Functional Cure 30 minutes @ 72°F Mix Ratio by Volume 1:1 Mix Ratio by Weight 1:1 Mixed Density 9.4 lbs./gal.: 1.10 gm/cc Mixed Viscosity 70,000 cps Working Time 45 seconds (28 gm @ 72°F) Surface Preparation: Clean surface by solvent-wiping any deposits of heavy grease, oil, dirt, or other contaminants. Surface can also be cleaned with industrial cleaning equipment such as vapor phase degreasers or hot aqueous baths. If working with metal, abrade or roughen the surface to significantly increase the microscopic bond area and increase the bond strength. Mixing Instructions: Proper homogeneous mixing of resin and hardener is essential for the curing and development of stated strengths. ---- 50 ML CARTRIDGES 1. Attach cartridge to a 50ml manual or pneumatic dispensing systems. 2. Open tip.3. Burp cartridge by squeezing out some material until both sides are uniform (ensures no air bubbles are present during mixing).4. Attach mix nozzle to end of cartridge. 5. Apply to substrate. Application Instructions: 1. Apply mixed epoxy directly to one surface in an even film or as a bead.2. Assemble with mating part within recommended working time.3. Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should flow out the edges to display adequate gap fill.) For very large gaps: 1. Apply epoxy to both surfaces2. Spread to cover entire area OR make a bead pattern to allow flow throughout the joint Let bonded assemblies stand for recommended functional cure time prior to handling. Chemical Resistance: Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75°F) Acetic (Dilute) 10% Poor Acetone Poor Ammonia Poor CornOil Excellent CuttingOil Excellent Ethanol Poor Gasoline(Unleaded) Excellent Glycols/Antifreeze Fair Hydrochloric10% Poor Isopropanol Poor Kerosene Excellent MethylEthylKetone Poor MineralSpirits Excellent MotorOil Excellent SodiumHydroxide10% Poor Sulfuric10% Poor Precautions: Please refer to the appropriate material safety data sheet (MSDS) prior to using this product. For technical assistance, please call 1-800-933-8266 FOR INDUSTRIAL USE ONLY
EOD Adhesive Kit - Devcon 1-Minute Epoxy 5-PackDispensing Kit - (14277)
This is a 5-pack cartridge & dispensing kit for the Devcon 1-Minute Epoxy (14277).  It includes 5 of the 50ml 2-Part cartridges of 14277, 10 mixing nozzles, and 1 MixPac dispenser.
This kit was specially configured for Police & Fire Departments, Emergency and First-Responder teams to aid in EOD and IED disarmament processes.  EOD means Explosive Ordinance Disposal, whereas IED means Improvised Explosive Device.
Devcon 1-Minute Epoxy is a very popular extremely fast setting epoxy adhesive uséd in industrial, professional, and Do-It-Yourself applications.  It is an adhesive with 30 second to 1 minute Rapid-curing, general-purpose adhesive/encapsulate which easily dispenses and mixes in seconds, dries in 1 minute, reaches functional strength in 30 minutes, and a full cure in 2 hours, more than 90% faster than most all other rapid-setting adhesives available.
KEY FEATURES:
Bonds rigid durable substrates such as metals, glass, ceramics, concrete, fiberglass, and wood in all combinations
30 seconds to 1 minute Extremely fast set/working time
Forms a clear hard rigid bond self leveling liquid in minutes
Functional strength in 30 minutes
Fully cured in 2 hours, more than 90% faster than most other fast-set adhesives
100% reactive, no solvents
Medium viscosity (70,000 cps)
Intended Uses:
Bonds metals, fabrics, ceramics, glass, wood, fiberglass and concrete (and in combinations)
Popular for filling voids and potting/filler compounds
Physical Properties:
Cured for 7 days @ 75° F
Adhesive Tensile Lap Shear [GBS]              1,600psi @ 0.005" bondline Dielectric Strength 490 volts/mils
Gap Fill                                                 Good
Impact Resistance                                 4.5 ft.lb./in.(2)
Service Temperature                             Dry, -40°F to 200°F
Shore Hardness                                    82 Shore D
Solids by Volume                                  100
Specific Volume                                    25.72 in.[3)/lb.
Tensile Elongation                                  1%
Tpeel                                                   2-3pli
TESTS CONDUCTED:
Adhesive Tensile Shear ASTM D 1002 Dielectric Strength, 490 volts/mil ASTM D 149 Cured Hardness Shore D ASTM D 2240 Cured Density ASTM D 792
Uncured:
Color                                                          Opaque Amber
Fixture Time                                              1 minute @ 72°F
Full Cure                                                    2hr. @ 72°F
Functional Cure                                         30 minutes @ 72°F
Mix Ratio by Volume                                 1:1
Mix Ratio by Weight                                  1:1
Mixed Density                                            9.4 lbs./gal.: 1.10 gm/cc
Mixed Viscosity                                          70,000 cps
Working Time                                             45 seconds (28 gm @ 72°F)
Surface Preparation:
Clean surface by solvent-wiping any deposits of heavy grease, oil, dirt, or other contaminants. Surface can also be cleaned with industrial cleaning equipment such as vapor phase degreasers or hot aqueous baths. If working with metal, abrade or roughen the surface to significantly increase the microscopic bond area and increase the bond strength.
Mixing Instructions:
Proper homogeneous mixing of resin and hardener is essential for the curing and development of stated strengths. ----
50 ML CARTRIDGES
1.  Attach cartridge to a 50ml manual or pneumatic dispensing systems.
2.  Open tip.
3.  Burp cartridge by squeezing out some material until both sides are uniform (ensures no air bubbles are present during mixing).
4.  Attach mix nozzle to end of cartridge.
5.  Apply to substrate.
Application Instructions:
1.  Apply mixed epoxy directly to one surface in an even film or as a bead.
2.  Assemble with mating part within recommended working time.
3.  Apply firm pressure between mating parts to minimize any gap and ensure good contact (a small fillet of epoxy should flow out the edges to display adequate gap fill.)
For very large gaps:
1.  Apply epoxy to both surfaces
2.  Spread to cover entire area OR make a bead pattern to allow flow throughout the joint Let bonded assemblies stand for recommended functional cure time prior to handling.
Chemical Resistance:
Chemical resistance is calculated with a 7 day, room temp. cure (30 days immersion) @ 75°F)
Acetic (Dilute) 10%
Poor
Acetone
Poor
Ammonia
Poor
CornOil
Excellent
CuttingOil
Excellent
Ethanol
Poor
Gasoline(Unleaded)
Excellent
Glycols/Antifreeze
Fair
Hydrochloric10%
Poor
Isopropanol
Poor
Kerosene
Excellent
MethylEthylKetone
Poor
MineralSpirits
Excellent
MotorOil
Excellent
SodiumHydroxide10%
Poor
Sulfuric10%
Poor
Precautions:
Please refer to the appropriate material safety data sheet (MSDS) prior to using this product.
For technical assistance, please call 1-800-933-8266
FOR INDUSTRIAL USE ONLY
×
×
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Paying via Direct Deposit
Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Flow Restrictor Insert Adapter (301631) for larger cartridges - 200ml, 400ml, 60
Broker Fee for Import Customs Clearance Service
Certificate of Compliance (COC)
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Perigee Direct
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Direct Deposit
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by