Clear 10"x4.5" BB 1" Port Whole House Water Filter System + Gauges

Description

Detailed Description:
Two Stage 10 Inch x 4.5 Inch Big Blue Heavy Duty Whole House Filter 1 Inch Ports
Usually we use Whole House Water Filter to deliver safer, cleaner, water to every faucet and showerhead in our whole house without drawing down water pressure.  Our Whole House Water Filter designed with oversized filters, housings to maintain the strongest water pressure as much as possible. Larger housings with larger filters require less frequent services, which saves your time, money, and efforts.
Replacement filters for this system.
Sediment, CTO Filters Set: search eBay number
192380567892
Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.
If you are looking to add a Ball Valve for your system, we have 1" WH Heavy Duty Ball Valve +  1" MIP Hex Nipple / Coupling part number
105363
for 1" Inlet/Outlet Systems
sold separately, For one set search eBay item number
192911665405
or for two sets search eBay item number
324496680760
.
If you are looking for 3/4" system ports, we have PVC bushing thread
105351
to change 1" ports to 3/4" ports sold
separately
Pre-loaded Filter Cartridges:
Vertical Gauge
* The first pressure gauge read your feed water pressure (your city water,  well or cottage pump water pressure).
* The second gauge read unit internal pressure.
Both gauges indicate you to replace the filters when changes in reading start especially when pressure drop increase, that is an indication that the cartridges are clogging with particular maters or the filters media is exhausted and the water inside the system can’t pass through the filters normally.
Removes/Reduces:
Sediment (silt, dirt, rust ETC.)
Pesticides
Bad tastes & odors
Giardia Cysts
Chlorine
Turbidity
Herbicides
VOC (volatile organic compounds)
THMs
MTBEs
Includes:
1 x 10 inch x 4.5 inch filter housing with double o rings and pressure release 1 inch Inlet / Outlet Brass Ports + 1/8" Pressure Gauge Hole.
1 x 10 inch x 4.5 inch Clear filter housing with double o rings and pressure release 1 inch Inlet / Outlet Brass Ports + 1/8" Pressure Gauge Hole.
2 x  Pressure Gauges
1 X 5 Micron PP Spun sediment filter, Dual Gradient Density Polypropylene.
1 X 10 inch CTO Carbon Block water filter.
Filter Wrench
Metal Wall Mounting Bracket
1 Year Limited Manufacturer's Warranty
NOTE:  No Fittings or Union Connectors are included with this package to connect this unit to your water supply. If such a parts are required, please contact us prior bidding for additional cost.
Specifications:
Sediment Filter Life - 6 months.
Carbon Filter Life - 10,000 Gallons
Less than 1 psi pressure drop @ 20 GPM
Flow rate: Approx 8 - 12 Gallon Per Minute / * Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions
Maximum recommended operating pressure: 90 PSI
Operating temperature: 40-100°F (5-40°C)
Dimensions: 18 inch height x 15 inch width x 8 inch depth
Weight: Approx 22 lbs.
Feed water pH range: 4.0 - 10.0
Preferable feed water pressure range: 20 - 90 PSI to Get the best filtration results keep it less than 60 PSI.
Maximum feed water TDS: 2000 ppm