4.5x10" Big Blue Whole House Water Filter System W PP Sediment/Carbon Block Set

Description

Specification
Material: Food Grade Polypropylene
Inlet/outlet: 1" FNPT
Max. Flow Rate: 15 GPM
Initial Pressure Drop: 1 psi
Pressure Range: 30-90 psi
Temperature Range: 40-100 °F
Size:
8.3" * 8.3" * 24.8"
Feature
Durable and Long-lasting
The heavy-duty whole house water filter housing is made of Reinforced Polypropylene for strength and chemical resistance. The o-ring is used to ensure leak-free installation.
Universal Filter Housing
Compatible with all 10" * 4.5" filter cartridge (big blue). It is ideal for home and office filtration and it also can work with various types of filter systems including boats, RV and more.
High Flow and Large Filtration Capacity
1" FNPT inlet and outlet ensure high water flow. You can customize your own home filtration system to reduce sediment, rust, particles, organic chemicals, chlorines and improve tastes & odors (depending on filter cartridges).
Easy Installation
The big blue filter housing is user friendly design with wrench and Built-in Pressure relief button for easy filter replacement. Just screw off and on to change filter cartridges with wrench.
100% Ms Satisfaction Guarantee
We have qualitative products as well as professional and technical support team. If you have any questions, just contact us.
Compatible with
Pentek Big blue heavy duty series, Big white heavy duty series, Whirlpool, GE, etc.
CAUTIONS
1. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
2. To prevent leaking, o-ring must be properly lubricated and seated in the groove of the sump.
3. Do not over-tighten sumps.
4. The disposable filter cartridge must be replaced sooner than six months if a noticeable reduction in flow rate occurs.
Big Blue Sediment Water Filters 10" x 4.5" Whole House /RO
Product Description
PP melt blown filter, based on the manufacturing technology of multi-leveled comprehensive Filter, is a kind of Melt-Blown three leveled PP impurity filter that is produced by three nozzles of different diameters. The product is structured with three different fibers, inside thin and outside thick, which better purifies water, increases the filte Impurity capacity, prolongs its service life and thus lowers the cost.
Specification:
Pore Size(μm):
5.0
Size(inch):
20
Material:
100% melt-blown thin fiber
Outer Diameter(mm):
115
Inner Diameter(mm):
28
Recommended Change-out Differential Pressure(Bar):
2.4bar@20℃
Maximum Operating Differential Pressure(Bar):
2.0bar@70℃; 4.1bar@20℃
Maximum Operating Temperature(℃):
80℃
O-Ring / Gaskets:
N/A
Connect Type:
N/A
Core:
Service life:
6-12 months.
We highly recommend to change filters every 6 months(Depends on your water Quality)
Package included
Big Blue Housing:
1 x 10" Big Blue Housing With Pressure Release and 1" Ports.
1 x Housing Wrench
1 x Heavy Duty Steel Mounting Bracket
4 x Screws
1Pcs PP Sediment (10"x4.5"):
1 x 10" *4.5" Sediment PP Filter
1Pcs Carbon Block (10"x4.5"):
1 x 10" *4.5" Sediment CTO Filter
Big Blue Housing+1Pcs PP Sediment :
1 x 10" Big Blue Housing With Pressure Release and 1" Ports.
1 x Housing Wrench
1 x Heavy Duty Steel Mounting Bracket
4 x Screws
1 x 10" *4.5" Sediment PP Filter
Big Blue Housing+1Pcs CTO Sediment :
1 x 10" Big Blue Housing With Pressure Release and 1" Ports.
1 x Housing Wrench
1 x Heavy Duty Steel Mounting Bracket
4 x Screws
1 x 10" *4.5" Sediment CTO Filter